Solid Carbide High Feed Endmill

High feed geometry is producing a positive cutting edge out of a series of continuous radii with no tangent point to induce wear. This cutting motion allows the use of heavy chip loads to achieve very high feed rates.
Imperial
Part number Cutting Dia Corner Radius # of Flutes Shank Dia Neck Lenght Overall Length Cutting Data
HFI4-0125 0.125 " 0.015 " 4 0.250" 0.650" 3.000"
HFI4-0250 0.250 " 0.031 " 4 0.250" 1.000" 3.000"
HFI6-0250-CH 0.250 " 0.026 " 6 0.250" 0.500" 3.000"
HFI6-0312-CH 0.312 " 0.036 " 6 0.312" 0.500" 3.000"
HFI4-0375 0.375 " 0.046 " 4 0.375" 1.250" 4.000"
HFI6-0375-CH 0.375 " 0.040 " 6 0.375" 0.563" 3.000"
HFI4-0500 0.500 " 0.061 " 4 0.500" 1.500" 4.000"
HFI6-0500-CH 0.500 " 0.056 " 6 0.500" 0.563" 4.000"
HFI6-0625-CH 0.625 " 0.070 " 6 0.625" 0.625" 4.000"
Metric
Part number Cutting Dia Corner Radius # of Flutes Shank Dia Neck Lenght Overall Length Cutting Data
HFM4-02 2 mm 0.234 mm 4 6mm 12mm 76mm
HFM4-03 3 mm 0.365 mm 4 6mm 16mm 76mm
HFM4-04 4 mm 0.465 mm 4 6mm 20mm 76mm
HFM4-05 5 mm 0.597 mm 4 6mm 20mm 76mm
HFM4-06 6 mm 0.731 mm 4 6mm 25mm 76mm
HFM4-06-1.5R 6 mm 1.500 mm 6 6mm 9mm 76mm
HFM6-06-CH 6 mm 0.570 mm 6 6mm 12mm 76mm
HFM4-08 8 mm 0.977 mm 4 8mm 30mm 76mm
HFM4-08-2R 8 mm 2.000 mm 4 8mm 12mm 76mm
HFM6-08-CH 8 mm 0.940 mm 6 8mm 12mm 76mm
HFM4-10 10 mm 1.226 mm 4 10mm 33mm 100mm
HFM5-10-2R 10 mm 2.000 mm 5 10mm 15mm 100mm
HFM6-10-CH 10 mm 1.100 mm 6 10mm 14mm 76mm
HFM4-12 12 mm 1.651 mm 4 12mm 38mm 100mm
HFM5-12-2R 12 mm 2.000 mm 5 12mm 18mm 100mm
HFM6-12-CH 12 mm 1.320 mm 6 12mm 14mm 100mm
HFM6-16-CH 16 mm 1.800 mm 6 16mm 15mm 100mm

High Feed Related Technical Information